KULUN / SCR Power Controller

ZERO-6 Integrated 6-channel Single-phase SCR Power Controller

Name: ZERO-6 Integrated 6-channel Single-phase SCR Power Controller
Brand: KULUN

KULUN ZERO-6: six single-phase zero-crossing power control channels in one unit for solar diffusion furnaces and PECVD equipment.

Output Voltage Range0–100% of mains input voltage

Output Current RangeAC 25–150 A

产品特征

Input	Mains supply	Single-phase AC 110–440 V, 45–65 Hz
Input	Control supply	DC 24 V
Output	Output voltage	0–100.0% of mains input voltage
Output	Output current	AC 10–200 A
Structure	Wiring	Bottom entry, bottom exit
Structure	Integration	6 integrated channels, independently controlled
Key features	Closed-loop mode	Open-loop control
	Firing mode	Zero-crossing fixed-cycle, zero-crossing variable-cycle
	Setpoint signal	Analog setpoint
	Inputs	6 analog inputs
	Outputs	1 relay output, NO contact, AC 240 V/3 A, DC 24 V/5 A
	Communication	Not supported
	Power sharing	Not supported
	Temperature PID loop	Not supported
Protection	Mains fault	Not supported
	Load aging	Not supported
	Overheating	Protection when thyristor temperature > 85 °C
	Overcurrent	Not supported
	Load break	Not supported

Six integrated single-phase channels for multi-zone kilns, ovens, mold heating and zoned heating on continuous lines.

For cabinets concentrating multiple power loops, reducing component count and internal wiring.

For OEM integration of similar multi-branch loops; per-channel capacity and load type checked individually.

What does "6-channel" mean?

The unit integrates six single-phase power control loops for centralized control of independent heating branches.

Can each channel drive a different load?

Yes per configuration, but each channel’s rated current, load type and protection must be confirmed separately.

What is the advantage of 6-channel integration?

Fewer components and less wiring in the cabinet; still reserve ventilation, maintenance and terminal access.

Is it suitable for multi-zone kilns?

Yes for multi-zone electric heating; zone accuracy and temperature controller configuration follow the process.

How to configure fuses and breakers?

Size per channel rating, short-circuit protection requirements and product specifications — never replace per-loop protection with one master device.

请提供应用行业、设备工况、电压电流、功率范围和现场环境，工程师将协助确认方案。