- Reliable quality and stable performance
- Professional, efficient service team with 20+ years of industrial control experience
- Proven implementations across many industries
KULUN / Control System
Turnkey Industrial Automation Control System Integration
KULUN turnkey industrial automation control systems: SCADA hosts, HMI configuration, PLC programming and field cabinets for kilns and electrolysis.
Delivery ModelTurnkey per project
Experience20+ years in industrial control
Features
Specifications
Item | Description |
Delivery model | Engineered to order; configured per project |
Control core | PLC programming; I/O count and brand set by the process |
Operator interface | HMI configuration; screens laid out per operator post |
Supervisory layer | SCADA host configuration; centralised monitoring and data logging |
Temperature loop | Thermocouple / RTD input + PID + SCR controller or heating power supply |
Matched power sources | SCR power controllers, DC power supplies, rectifiers, induction heating supplies — selected by process |
Track record | 20+ years in industrial automation control |
Scope of supply | Design, panel build, programming and configuration, commissioning, training |
Typical Applications
Temperature automation systems
Furnace temperature is measured by thermocouple or RTD, the PLC runs the PID loop, and the output drives an SCR controller or heating power supply. Used on industrial furnaces, annealing lines and reactors that follow a temperature profile.
Kiln and glass-fiber drawing control systems
For kilns, glass tank furnaces, bushings and crucible drawing with several heated zones, each zone gets its own power control and temperature loop, with a SCADA host showing zone power and temperature.
Utility and process automation systems
Sequence control and interlocking for water treatment, CNG filling stations, gates, compressors and wireless level monitoring, integrated with soft-starter panels, power panels and field instruments.
FAQ
How are the output voltage and current of a turnkey system determined?
Per project: start from the load type (resistive, inductive, transformer primary) and the process power, then fix the power-source rating and control method. The control system does not set voltage or current; it is matched to the power source it drives.
Can you supply the control system only and use our existing power equipment?
Yes. Kulun Electric builds industrial power supplies and also delivers engineered automation integration (SCADA host, HMI configuration, PLC programming). The control system can be paired with our own power sources or integrated with equipment already on site; scope follows a site survey.
What information do you need to prepare a proposal?
Industry, equipment duty, required output voltage and current, power range, incoming supply, control mode (local or supervisory), installation conditions and process requirements. From these we fix the PLC I/O count, HMI screens, power-source rating and panel layout.
Can existing equipment be retrofitted with automation?
It can be assessed. PLC, HMI and supervisory monitoring can be added to existing power sources and circuits to obtain temperature closed-loop control, data logging and interlocking. Feasibility depends on the field instruments, the circuits and the space available in the panel.
Selection Inquiry
Send the industry, equipment duty, temperature profile, required voltage and current, incoming supply and control mode; our engineers will confirm the PLC I/O count, HMI screens, power-source rating and panel layout.
